QTP: Quad Twisted Pair – Moving 4 channels of Analog or 8 channels of AES audio over CAT5, CAT5e, and CAT6

Moving 4 channels of Analog Audio or 8 channels of AES over CAT5, CAT5e, and CAT6
Skip to content
  • HOME
  • WHAT IS QTP?
  • Buy QTP
  • QTP-Quote
  • QTP- Compliant
  • QTP-FORUM
  • 10-Q-mandments
  • WBS
    • Ward-Beck Systems Products
    • WBS-QTP
    • WBSps
  • APK
    • Audio Aholics
    • Linear Traveling Potentiometer

Quad- Twisted Pair – 20150224 AES meeting slides

February 22, 2015AES, Audio, Balancing, News, Pinout, Presentation, QTP, QTP to XLR, Quad Twisted Pair, Testing, WBS, XLRadmin

 

Slide01

 

 

Slide02 Slide03 Slide04 Slide05 Slide06 Slide07 Slide08 Slide09 Slide10 Slide11 Slide12 Slide13 Slide14 Slide15 Slide16 Slide17 Slide18 Slide19 Slide20 Slide21 Slide22 Slide23 Slide24 Screenshot 2015-03-05 19.28.51

 Slide26 Slide27 Slide28 Slide29 Slide30 Slide31 Slide32 Slide33  Slide35 Slide36 Slide37 Slide38 Slide39

Post navigation

Some QTP Hookup →

Recent Posts

  • COMMENTS ON DRAFT AES72-XXXX
  • AES X246 out for comment
  • Problems of Assigning Channels Based on Color alone
  • AES X246 at AES145
  • The Audio Engineering Society and QTP
  • QTP User guide Expands with Support from Ward-Beck Systems
  • The B.O.B.Cats are here!
  • Planning some mix and match tests
  • Making a QTP patching system using DB25 patchbays
  • A Lexicon 480L with a QTP and LTP back
  • QTP DB25 Pin out standards
  • QTP by the ocean
  • QTP and Studio Hub – > Handshaking
  • QTP Cable Price Request
  • April Fools are paying 4 times the price.
  • QTP-DB25M and QTP-25F
  • Avoid testing with non T-568A cables
  • The First QTP system!
  • The First Batch of QTP-DB25 Adapters
  • QTP vs Mogami

RSS Ward-Beck Systems

RSS Audio Aholics

RSS Phase Book

  • Adding A Cross Cut slide to an Elgin Hardinge Lathe
  • Bridgeport Lego
  • Phase 3…
  • Thinking about it…
  • Elgin Harding Lathe – Cross Slide Teardown
  • Engraving initials into a brass Hammer
  • Tool post and Holder
  • Microphone Description Protocol
  • Hardinge Lathe 204 frame Motor
  • Gorton P1-2 – pantomill – CNC conversation and the 16:1 precision advantage

Archives

  • March 2019
  • October 2018
  • May 2018
  • October 2017
  • April 2017
  • December 2015
  • July 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015

Blogroll

  • APKaudio
  • Ward-Beck Systems
Proudly powered by WordPress