QTP: Quad Twisted Pair – Moving 4 channels of Analog or 8 channels of AES audio over CAT5, CAT5e, and CAT6

Moving 4 channels of Analog Audio or 8 channels of AES over CAT5, CAT5e, and CAT6
Skip to content
  • HOME
  • WHAT IS QTP?
  • Buy QTP
  • QTP-Quote
  • QTP- Compliant
  • QTP-FORUM
  • 10-Q-mandments
  • WBS
    • Ward-Beck Systems Products
    • WBS-QTP
    • WBSps
  • APK
    • Audio Aholics
    • Linear Traveling Potentiometer

Avoid testing with non T-568A cables

March 28, 2015Connections, IDentification Area, Interface, QTP, Quad Twisted Pair, RJ45, T-568A, Testingadmin

Avoid testing with non T-568A cables.
It can save you a few hours of trouble shooting and frustration!  QTP - NOT QTP vs QTP

Post navigation

← The First QTP system! QTP-DB25M and QTP-25F →

Recent Posts

  • Problems of Assigning Channels Based on Color alone
  • AES X246 at AES145
  • The Audio Engineering Society and QTP
  • QTP User guide Expands with Support from Ward-Beck Systems
  • The B.O.B.Cats are here!
  • Planning some mix and match tests
  • Making a QTP patching system using DB25 patchbays
  • A Lexicon 480L with a QTP and LTP back
  • QTP DB25 Pin out standards
  • QTP by the ocean
  • QTP and Studio Hub – > Handshaking
  • QTP Cable Price Request
  • April Fools are paying 4 times the price.
  • QTP-DB25M and QTP-25F
  • Avoid testing with non T-568A cables
  • The First QTP system!
  • The First Batch of QTP-DB25 Adapters
  • QTP vs Mogami
  • QTP-DB25 Family of products
  • QTP AES 110Ω to 75Ω SPDIF BNC over Quad Twisted Pair!

RSS Ward-Beck Systems

  • Fitting new prototype panel in metalshop
    Prototyping another custom Eurorack panel for a satisfied repeat customer. This panel was made in our in-house metalshop. We prototype it, and fit it over the populated module to make sure everything lines up properly. Then, once we're sure everything fits, we can proceed to doing the final panel with painting and silkscreening. Looking for […]
  • 2018 Black Friday Sale - 25% off and free shipping over$500
    It's our weeklong Black Friday sale! From now until November 30th, we are holding a 25% off sale on some of our best-selling items. Here's your chance to stock up on some professional-grade audio gear for your kit! Click here to go to the sale page! QTP Products Sale Price (US$) [QTP-DB25F] DB25 Female Adapter: […]
  • AES and NAB New York Day One
    It was a great first day for Team Ward-Beck at the 2018 AES and NAB New York shows, which are being held concurrently at the Javits Center. Ward-Beck is part of the interop demonstration in the Audio Engineering Society's AoIP pavillion at the AES show. There's a great team there, putting together a neat and informative […]
  • Win a QTP prize pack at AES and NAB New York
    Ward-Beck will be holding our inaugural Poker Run at the NAB and AES New York shows, happening from October 17-19th and October 17-18th respectively. If you are attending the show, you can pick up a card at the eight locations below. Each booth will have a complete deck of 52 cards.  Pick up a card at […]
  • Ward-Beck will be at CCBE 2018!
    Ward-Beck will be at the 2018 CCBE conference, held by The Association of Central Canada Broadcast Engineers, Technologists and Technicians! We will be running a workshop there on Thursday September 27, from 1.30pm to 4.30pm. The workshop will be held in the Auditorium, North Wing, Lower Level. We hope to see you all there!
  • Some IBC photos
  • Like clockwork
    Post show picket full of cards
  • Toronto AES presents seminar on the state of the Toronto audio industry - September 23-24, 2018
    The Toronto AES is celebrating its 50th year as a section of the Audio Engineering Society, by holding a 2-day seminar. The seminar will feature presentations and interactive panel discussions that highlight the state of the audio industry in Toronto. Ward-Beck is pleased to be one of the sponsors for this event. We believe this […]
  • Find Ward-Beck's AES67/ST2110 products on demo @ IBC 2018 (IP Showcase, Room E106)
    Ward-Beck's AES67/ST2110 networked audio equipment will be demonstrated in action at the IP Showcase, at the upcoming IBC 2018 convention. This year's IBC will be held in RAI Amsterdam from September 13th to 18th, 2018. Among the equipment that we will demonstrate at the convention, is our newly-released PreMO-222. The PreMo-222 is a dual mic/line pre-amplifier […]
  • How to set up our PreMo-222 for talk show radio or podcasts
    A very serious conversation being held via our new PreMo-222 networked mic preamplifier. Talk show radio anyone? ;) Below is how the PreMo-222 would be set up for talk show radio. A one-stop shop for your podcast/radio needs ;)

RSS Audio Aholics

RSS Phase Book

  • Arduino Project – Digitally Controlled Analog Surround Sound Panning – Open Source
  • 1k on scope
  • Books of 2015 – Supplemental and future reading and reference
  • Sound guy xmas – Gigantic keyboard
  • Elevator Projects
  • sound guy xmas – Tactical Christmas Stocking
  • Sound guy Xmas – Scotch-tape Measuring-Tape tape
  • sound guy xmas – Darth Vader toaster
  • Sound Guy Xmas – Scaena Line Array
  • Sound guy Xmas – ScrewDrivers

Archives

  • October 2018
  • May 2018
  • October 2017
  • April 2017
  • December 2015
  • July 2015
  • May 2015
  • April 2015
  • March 2015
  • February 2015

Blogroll

  • APKaudio
  • Ward-Beck Systems
Proudly powered by WordPress